Updated November 2026
Looking for a pump for a pressure washer that fits your machine and delivers the flow you need? Choosing a replacement pump comes down to a few numbers: shaft size, shaft orientation (horizontal or vertical), rated PSI and GPM, and whether the inlet and outlet ports line up with your existing setup. The picks below are ranked by how well each one matches common replacement needs, based on product listings, brand reputation and owner feedback patterns.
Our top picks at a glance
- 1
TOP CHOICEBest overallReplacement Pressure Washer Pump Rebuild Kit for Dewalt,Simpson,CraftsView on Amazon - 2
TOP CHOICEBest for Honda and Simpson swapsAxial Cam Replacement Pump Rebuild Kit for Honda Simpson DeWalt Generac 3/4" HorizontalView on Amazon - 3
TOP CHOICEBest for higher GPMHorizontal Pressure Washer Pump, 3/4" Shaft Crankshaft Triplex Plunger, 3GPMView on Amazon - 4
Best for heavy-duty 9–15 HP enginesSelf-Priming Horizontal Replacement Pressure Washer Pump Rebuild Kit fView on Amazon - 5
Best for vertical shaft machinesTOOLCY OEM Power Washer Pump, 7/8" Shaft Vertical, Rear Side 3100 PSIView on Amazon - 6
Best for rear-port vertical setupsRear Inlet/Outlet, Axial Cam Replacement for Honda Homelite CraftsmanView on Amazon
Our Top Picks
| Product | Best for | Key feature |
|---|---|---|
| Pressure Washer Pump Rebuild Kit (WOJET) | Overall replacement | Unloader included, 3400 PSI |
| Axial Cam Rebuild Kit (3/4″ horizontal) | Honda and Simpson swaps | Wide engine brand compatibility |
| Horizontal Triplex Plunger Pump (3GPM) | Higher flow needs | Two outlet interface options |
| WOJET High-Flow Triplex Pump (4400 PSI) | Heavy-duty engines | 4.0 GPM, 1″ shaft |
| TOOLCY Vertical Pump (7/8″) | Vertical shaft machines | Rear-side 3100 PSI |
| Axial Cam Vertical Pump (rear ports) | Rear-port vertical setups | Rear inlet and outlet |
Replacement Pressure Washer Pump Rebuild Kit for Dewalt, Simpson, Craftsman, Honda, Generac (WOJET)
Replacement Pressure Washer Pump Rebuild Kit for Dewalt,Simpson,Craftsman,Honda,Generac,Axial Power Washer Pump with Unloader WOJET Horizontal Self-Priming Pressure Washer Pump 3/4"Shaft 3400PSI 2.5GP
Best for: Overall replacement with an unloader included
A solid all-round choice for owners who want a horizontal self-priming pump with the unloader already matched to the unit.
Pros
- Includes unloader and 3/4″ shaft fitment
- Rated 3400 PSI at 2.5 GPM
Cons
- Confirm your engine brand fits before ordering
Axial Cam Replacement Pump Rebuild Kit for Honda Simpson DeWalt Generac 3/4″ Horizontal
Axial Cam Replacement Pump Rebuild Kit for Honda Simpson DeWalt Generac Homelite Karcher Troy-Bilt Ryobi YAMATIC 3/4" Horizontal Shaft Pressure Washer Pump Max 3400 PSI 2.5 GPM
Best for: Honda and Simpson swaps
Suits owners replacing a worn pump on a common brand engine who want a familiar axial cam design.
Pros
- Broad list of compatible engine brands
- Max 3400 PSI, 2.5 GPM
Cons
- Check shaft diameter against your original pump
Horizontal Pressure Washer Pump, 3/4″ Shaft Crankshaft Triplex Plunger, 3GPM
Horizontal Pressure Washer Pump, 3/4" Shaft Crankshaft Triplex Plunger, 2600-3300 PSI, 3GPM, Replacement Power Washer Pumps ,Two Kinds of Water Outlet Interfaces
Best for: Higher flow needs
Fits users who want more water volume for faster rinsing, with two outlet interface options to match hose setups.
Pros
- 3 GPM flow for faster cleaning
- Two outlet interface types
Cons
- Pressure range is wider, so confirm your wand and nozzle ratings
Self-Priming Horizontal Replacement Pressure Washer Pump Rebuild Kit (WOJET High-Flow 4400 PSI)
Self-Priming Horizontal Replacement Pressure Washer Pump Rebuild Kit for Honda,Dewalt,Simpson,Generac,Unloader for MRO,9-15HP WOJET High-Flow Triplex Plunger Pressure Washer Pump 4400PSI 4.0GPM 1"Shaf
Best for: Heavy-duty 9–15 HP engines
Aimed at owners running larger engines who need high pressure and a 1″ shaft fitment.
Pros
- 4400 PSI and 4.0 GPM rating
- Self-priming design with rebuild kit
Cons
- High output may be more than light-duty machines need
TOOLCY OEM Power Washer Pump, 7/8″ Shaft Vertical, Rear Side 3100 PSI
OEM & Power Washer Pump for Gas Washer, Replacement for Simpson, Honda etc TOOLCY 7/8" Shaft Vertical Pressure Washer Pump, Rear Side 3100 PSI 2.5 GPM
Best for: Vertical shaft machines
A good fit for owners whose machine uses a vertical shaft and rear-side ports.
Pros
- 7/8″ vertical shaft fitment
- 3100 PSI at 2.5 GPM
Cons
- Confirm port orientation before installing
Buying Guide
Shaft Size and Orientation
Before you compare any other specs, confirm whether your engine has a horizontal or vertical shaft and measure the shaft diameter. A pump with the wrong shaft size or orientation will not mount correctly, so this is the first thing to check on your machine or the old pump.
Horizontal shaft pumps are common on many consumer and mid-range gas washers, while vertical shaft pumps are often found on smaller, lighter units. Matching the orientation saves you from buying an adapter or returning the part.
PSI and GPM Ratings
PSI measures pressure and GPM measures water flow. A replacement pump should match the ratings of the original or stay close to them, since a pump rated far above your engine’s capability can strain the motor and a pump rated too low will underperform.
If you are upgrading rather than replacing, look for a pump with higher GPM for faster cleaning on large surfaces, but confirm your engine has enough horsepower to drive it.
Inlet and Outlet Port Configuration
Check where the water inlet and outlet ports sit on the pump body. Some models use rear-side ports, while others offer different interface options. Matching the port layout to your existing hoses and fittings keeps installation simple.
Unloader and Included Components
Some pumps come with an unloader valve, which regulates pressure and protects the system when the trigger is released. If your old pump had one, make sure the replacement includes a compatible unloader or that you can reuse your existing one.
Rebuild kits, which include seals and internal parts, are a lower-cost option when the pump body is still in good shape. Full replacement pumps make more sense when the housing or plungers are worn beyond repair.
Brand Compatibility and Engine Match
Many pumps list several engine brands as compatible, but compatibility claims vary. Compare the listed engine brands and models with your own before buying, and check the model number on your washer or engine to be sure.
FAQ
Can I replace my pressure washer pump myself?
Many homeowners replace a pump with basic hand tools, as long as they disconnect power and water and follow the manufacturer’s instructions. Pay close attention to alignment with the engine shaft and tighten mounting bolts evenly. If you are unsure, a small engine repair shop can handle the installation.
What is the difference between a rebuild kit and a full pump?
A rebuild kit contains seals, valves and other wear parts that you install into an existing pump body. A full replacement pump is a complete unit ready to mount. Rebuild kits are usually a better choice when the housing is still sound.
Does a higher GPM always mean a better pump?
Not necessarily. Higher GPM moves more water and can speed up cleaning, but it also requires more engine power. If the pump is too large for your engine, you may experience overheating or premature wear.
How do I know if my pump needs replacing?
Common signs include loss of pressure, pulsing or irregular spray, water leaking from the pump body, unusual noise, and difficulty priming. If a rebuild kit does not restore performance, a full replacement is often the next step.
What does self-priming mean?
A self-priming pump can draw water into itself and start pumping without the water source being positioned above the pump. This is useful for washers that pull from buckets, tanks or ground-level sources, though performance still depends on proper hose connections.
Conclusion
If you need a direct replacement for a common horizontal-shaft gas washer, a rebuild kit or a horizontal replacement pump that matches your original specs is usually the most practical choice. If your machine has a vertical shaft, the vertical option is the one to look at.
For upgrades that need more flow, a high-flow triplex pump can suit larger jobs, but only if your engine has the power to match. Confirm shaft size, orientation, ports and ratings first, and the right pump for your pressure washer will be much easier to pick.
